Hybrid Seal – The Ultimate Polymer-Based Hybrid Waterproofing Solution for All Structures

Hybrid Seal is a cutting-edge, polymer-modified hybrid waterproofing coating engineered to create a seamless, impenetrable barrier against water and moisture infiltration. As a two-component system comprising advanced mineral compounds and fortified liquid polymers, it delivers superior protection for concrete, masonry, and various construction substrates. This high-performance solution completely replaces outdated methods like bitumen and traditional membrane systems, offering enhanced flexibility, durability, and ease of application.

Key Features & Benefits

1. Complete Waterproof Barrier: Forms a monolithic, hydrophobic layer that prevents water penetration under hydrostatic pressure.

2. Positive & Negative Side Waterproofing: Effective for both interior and exterior applications, including foundations, basements, and water-retaining structures.

3. Weather & UV Resistant: Withstands extreme temperature fluctuations, direct sunlight, rain, and humidity without degradation.

4. Exceptional Adhesion: Bonds strongly to concrete, cement, brick, stone, and other building materials.

5. Crack-Bridging Ability: Flexible enough to accommodate structural movement and substrate cracking.

6. Breathable: Allows trapped moisture within concrete to escape, preventing blistering and vapor pressure buildup.

7. Abrasion & Chemical Resistant: Ideal for industrial floors, parking decks, and areas exposed to chemicals or mechanical wear.

8. Safe & Environmentally Friendly: Solvent-free, non-toxic, low VOC, and non-flammable.

9. Quick Return to Service: Walkable and rain-resistant within 24 hours.

10. Paintable & Tile-Ready: Can be coated with architectural paints or directly tiled after curing.

Applications

Hybrid Seal is the ideal choice for:

• Basement & Foundation Waterproofing

• Roof Terraces & Balconies

• Water Tanks, Swimming Pools & Reservoirs

• Bathrooms, Wet Rooms & Shower Areas

• Parking Decks & Industrial Floors

• Bridge Decks & Underground Structures

• Sewage & Water Treatment Plants

Why Choose Hybrid Seal Over Traditional Systems?

Compared to conventional bitumen and sheet membranes, Hybrid Seal offers:

• Seamless Application: No joints or seams, eliminating leak paths.

• Ease of Installation: Spray, roller, or brush application without torches or special equipment.

• Long-Term Durability: Resists aging, root penetration, and environmental stress.

• Cost-Effective: Lower lifecycle cost due to minimal maintenance and repair needs.

Technical Data & Application Guide

Composition: Two-component, polymer-modified cementitious coating.
Coverage: Approx. 2–3 kg/m² per coat (depending on substrate).
Curing Time: Touch dry in 2–4 hours; fully cured in 24 hours.
Application Temperature: +5°C to +35°C.
Packaging: 20 kg kits (Component A + Component B).

Instructions:

1. Prepare surface: clean, sound, and free of loose material.

2. Pre-moisten substrate (no standing water).

3. Mix components thoroughly using a low-speed drill until homogeneous.

4. Apply first coat with brush, roller, or spray.

5. Apply second coat after 4–6 hours (cross-direction recommended).

6. Protect from rapid drying and rainfall during curing.

Safety & Storage

• Wear protective gloves, goggles, and clothing during handling.

• Store in a cool, dry place away from direct sunlight.

• Shelf life: 18 months in unopened, original packaging.